SECTION 1: PRODUCT IDENTIFICATION

Product Class: Water Based Acrylic Primer

Emergency Calls:     (800) 424-9300                                                              H.M.I.S.   Health - 1

Information Calls:    (216) 871-4737                                                                               Flammability - 0
  
                                                                                                                                          Reactivity - 0

SECTION 2: HAZARDOUS INGREDIENTS/IDENTITY

INGREDIENT                                CAS NO.                         OSHA PEL                            ACGIH TLV

                                                                              TWA              STEL               TWA               STEL

Propylene Glycol                            57-55-6         -------------------  None Established   ----------------------

Ester Alcohol                               25265-774       -------------------  None Established   ---------------------- Methyl

Pyrrolidone                                    872-504                     No Occupational Exposure limits established

Acrylic Polymer                          Trade Secret

Polyurethane Dispersion           Trade Secret

Titanium Dioxide                        13463-67-7

Aluminum Silicate                        1332-58-7

Magnesium Silicate                    14807-96-6

Calcium Carbonate                 317-65-3

This product contains pigments that maybe a nuisance dust hazard in dry powder form or when this product is sanded, but not in
wet paint.  A paint preservative is present, but it is not hazardous at the level of usage.

DOT INFORMATION:  None required.

SECTION 3: PHYSICAL AND CHEMICAL PROPERTIES

Physical Form:                                Liquid
Appearance and Odor:                   White color, Sweet Odor
Boiling Range:                                192 to 396 deg. F
Vapor Density:                               Heavier than Air
Evaporation Rate:                           Slower than ether
Vapor Pressure:                            NA
Weight per Gallon:                         10.93 l/gal.
Solids by Weight:                           45.2%
Solubility in Water:                         Yes
VOC:                                      <250 gm/l <2.09 lb/gal.

SECTION 4: FIRE AND EXPLOSION DATA

Flash Point:                                     >200 deg. F TCC (ASTM D-56)
Flammability Limits:                        LEL -  NA
Extinguishing Media:                        Not required
Flammability Class:                          DOT: Not Regulated                OSHA: Not Regulated

Special Fire Fighting Procedures:

Containers exposed to heat should be kept cool with water.

Unusual Fire and Explosion Hazards:

During a fire, vapors may form an explosive mixture in air. Closed containers may explode (due to build up of steam pressure).

SECTION 5: HEALTH HAZARD DATA                                       Advanced Technology UMA #1105

Routes of Entry: Inhalation, Skin Contact, Eye Contact, Ingestion.

Effects of Overexposure:
Inhalation:  -  Dizziness, headache, nausea
Eye Contact: Liquid and vapors are irritating to the eyes and can cause pain, tearing, reddening and swelling.  However damage is usually reversible.
Skin Contact: Repeated or prolonged skin contact can result in dry, cracked skin.
Ingestion: Can result in irritation in the mouth, stomach tissue and digestive tract. Symptoms can include sore throat abdominal pain, nausea, vomiting and diarrhea.

MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE:
None known, consult your physician.

EMERGENCY AND FIRST AID PROCEDURES:
Eyes:  Flush eyes with clean water for at least 15 minutes. See Physician.
Skin:   Remove with soap and water. Remove contaminated clothing.
Inhalation: Remove from exposure to fresh air.
Ingestion: DO NOT INDUCE VOMITING. Give 1-2 glasses of water to dilute.  Consult a physician immediately

SECTION: 6: REACTIVITY DATA:

Stability: This material is stable.  Materials to avoid: None
Hazardous Polymerization: Will not occur
Decomposition Products: By high heat and fire: C02, CO and other toxic vapors and mist.
Conditions to avoid: Avoid extreme heat.

SECTION 7: SPECIAL PRECAUTIONS AND SPILL/LEAK PROCEDURES

Precautions to be taken on handling and storage:
Store upright is sealed containers away from heat and flame.

Other precautions:
Remove and wash contaminated clothing before reuse.

Steps to be taken in Case of Spills:
Ventilate area. For small spills, dilute 50 to 100 fold with water. For larger spills, dike the area with absorbent and scoop up.

Waste Disposal Method:

Dispose of in accordance with local, state, and federal regulations.

For further information, contact the United States Environmental Protection Agency RCRA hotline (800) 242-9342

SECTION 8: SPECIAL PROTECTIVE HANDLING INFORMATION

Special Sensitivity: NA
Handling and Storage: Do not reseal if contamination is suspected.  Employee education and training in safe handling of this product are 
required under OSHA Hazard Communication Standard.  Keep from freezing
Respiratory Protection: Use particle mask to avoid breathing spray mist.
Ventilation:  Local exhaust
Protective Gloves: Recommended to prevent extended exposure.
Eye Protection: Safety glasses are recommended

NOTE: Read MSDS completely before use and follow all label Instructions.